Molybdenum tube and pipe can be used under temperature up to 1,800 degrees, in components of electron tube, heaters of high-temperature furnaces and thermocouple retainers, etc.
Molybdenum tube can also be used as a rotary targets for coating, which is widely used in solar industries.
Edgetech Industries LLC (ETI) provides Moly tube from forged rods and sintering directly. Mo tube with OD smaller than 60mm are mostly machined and gun drilled from forged rod, tube with larger diameter are sintered per size directly. The process methods of Moly tube and crucible are always for saving cost and according to customer’s requirement.
The smallest tube we can carry is 0.187” outer diameter with 0.025” wall thickness, largest can be with 500mm outer diameter. We can also provide TZM alloy tubes and Mo-La alloy tubing, but with a more narrow size range. The hardness of TZM Alloy is higher and it’s harder to be machined. Minimum OD for TZM alloy tube and Mo-La tube is 10mm, length will be limited according to OD and wall thickness.
Specification for our Moly tube
|Size||0.187”-20”OD, 106” max length.
Max Length: 3000mm for molybdenum tube as single piece
|Process||Sintered, ggun drilling|
|Surface||Finish turning for outer surface, Drilling for inner surface|
|Related product||TZM Tube, Mo-La Tube, Molybdenum Crucible, Molybdenum Rod|
We can also provide welding Moly tube and riveting tubing that is made by sheet and strip. This kind of large molybdenum tubes are used as molybdenum heat shielding.
Please send us your specifications for molybdenum tube to email@example.com.
Packaging for our Mo tube
The standard package for Moly tube, TZM Alloy Tube, Mo-La alloy tube is wooden crate, so that the goods can be protected during handling and transportation.