All posts by: Edgetech

About Edgetech

Processing performance Tantalum has good plasticity, low deformation resistance, and low process hardening. It can be processed into plates, strips, foils, pipes, rods and wires at room temperature. Tantalum can be formed into various devices & parts using traditional processes, equipment and tools such as metal spinning, deep drawing, bulging, bending, punching & cutting, stamping […]

Molybdenum is a refractory metal with the symbol Mo and atomic number 42. It is most commonly used as a high temperature, corrosion resistant metal alloy in steel, cast iron and super alloys for the military and defense industry, semiconductor industry and specialty machine shops. Molybdenum metal products are available in plate, sheet, strip & foil, bar, […]

The most common definition of refractory metals includes five elements: niobium, molybdenum, tantalum, tungsten, and rhenium. They share some properties, including a melting point above 2000 °C and high hardness at room temperature. Their machineabilities are quite different, we will introduce the processed & applications for these metal in solid bar form here. Most common processing […]

The method is basically the same as the method for preparing tungsten powder. The hydrogen reduction method of molybdenum oxide is still the only method for producing molybdenum powder. The raw material for the production of molybdenum powder is generally ammonium paramolybdate 3(NH4)O·7MoO3·4H2O. Ammonium paramolybdate can be converted to MoO3 or MoO2 by calcination or hydrogen reduction. […]

Porous titanium has found a wide variety of unique and important applications including filtration, separation, catalyst supporting, gas absorbing, gas sparging, current collection, and medical implantation. Manufacture process for porous titanium Raw titanium powder preparation—Cold isostatic pressing or rolling—Sintering in high temperature & vacuum furnace-Machined to size-Assembled to filter if required Liquid/gas diffusion layers (LGDLs) […]

Silicon powder’s manufacturing process can be simply described as: breaking & milling from silicon lump, but it’s actually much complicated in order to get the powder with required purity and particle size distribution. 1st Step: Raw material choosing, this concerns the purity of final silicon powder. The silicon lump prepared for manufacturing powder is about >100mm. 2nd Step: Breaking […]

Tungsten, or wolfram, is a chemical element with the symbol W and atomic number 74. The name tungsten comes from the former Swedish name for the tungstate mineral scheelite, tung sten or “heavy stone”, most important properties for tungsten is high melting point and high density. Meanwhile, the hardness is high and it’s quite fragile compare […]

Porous titanium, also named as sintered titanium and titanium foams, is sintered from titanium powder. It has pore structure exhibit high specific strength, high energy absorption, excellent corrosion resistance and biocompatibility. Generally, porous titanium processed from irregular titanium or titanium alloy irregular powder. It can be isostatically pressed, molded, and extruded. The main process for porous […]

Tantalum is the most corrosion resistant metal in common use today. Tantalum is not a noble metal, but it is comparable to them in terms of chemical resistance. When exposed to air, tantalum forms a very dense oxide layer (Ta2O5) which protects the base material from aggression. This oxide layer therefore makes tantalum corrosion-resistant. Tantalum‘s corrosion resistance in […]

With its unique properties, porous titanium can be widely used in the pharmaceutical industry, water treatment industry, food industry, bioengineering, chemical industry, petrochemical, metallurgical industry and gas purification. It is a new material with broad development prospects. Typical uses include: – In the infusion of the pharmaceutical industry, small injections, eye drops, decarbonization filtration in the concentration […]